Plastic Bottle Cap Making Machine / Injection Molding Machine
Features:
Plastic Bottle Cap Making Machine / Injection Molding Machine adopts Europe technology,hydraulic unit adopts proportional pressure and flow control,the pressure and the speed can be adjusted,stable movement curve and gentle shock,the computer is imported from Industry family. The LCD displaying screen with high clarity has Chinese and English language to use. Close-loop PID temperature control with the advantage of high precision. The operating table of the injection moulding machine have two safety, one is machine safety, another is electrical safety, that ensures the operators’s safety.
Mould Our mould producing center produces exact mould ,adopts the high grade material to make. The perform mould uses the hot runner technology, inside uses the imported steel, the surface’s brightness is very high and the service time is very long.
The design of equipment is logical, easily operation.
The automatic level is very high, the wage is very little.
Using famous imported hydraulic, electrical, sealing parts, the trouble is low.
No matter what the product’s outside or inside, they can get the best guarantee, the good products rate can be above 99%.
Plastic Bottle Cap Making Machine / Injection Molding Machine
1.Clamping Unit
Reliable design with 5 pivot diagonal toggle；Twin-cabinet structure with high rigidity;Automatically adjusting the position of mould;
2. Injection Unit
According tothe product production needs, free choosing different diameters of screws;
Control the charge back pressure through a pressure valve Matching accumulator as to promote the injection performance
3. Control System
Configured with imported hydraulic and electrical components of high Quality
4. Hydraulic System
Advanced hydraulic system design, through proportional control of pressure, flow achieves rapid multi-level pressure, speed switching, the system configuration is reasonable, stable and
reliable.
| Item | Unit | Data |
| Max. clamping force | KN | 950 |
| Max. opening force | mm | 340 |
| (V×H)Space between tie bars | mm | 360×360 |
| (min-max)Mould height | mm | 135-380 |
| Max. daylight | mm | 720 |
| Ejector force | KN | 25.4 |
| Ejector stroke | mm | 85 |
| Ejector quantity | | 5 |
| Screw diameter | mm | 30 | 35 | 40 |
| Screw L/D ratio | L/D | 24.5 | 21 | 18.4 |
| Theoretical shot volume | cm3 | 113 | 154 | 201 |
| Plasticising weight(PS) | g | 103 | 140 | 183 |
| Injection pressure | Mpa | 249 | 183 | 140 |
| Theoretical injection rate(PS) | g | 67.5 | 91.8 | 120 |
| Plasticising capacity(PS) | g/s | 8.3 | 12.5 | 18 |
| Screw torque | N.m | 510 |
| Max. screw rotate speed | r/min | 260 |
| Injection stroke | mm | 160 |
| Pump motor power | KW | 11 |
| Pump pressure | Mpa | 16 |
| Heating power | KW | 7.3 |
| Heating zone | | 4 |
| Size | m | 4.25×1.2×1.8 |
| Net weight | t | 3.2 |
| International designation | | 950-280 |
Parts Specification
| | Spare parts | brand | origin |
| 1 | Hydraulic plastising motor | ZY | Italy |
| 2 | Hydraulic pump | YUKEN | Japan |
| 3 | Proportional hydraulic valve | YUKEN | Japan |
| 4 | Reversal valve | YUKEN | Japan |
| 5 | Transducer | LION | Japan |
| 6 | Sealing rings | VALQUA | Japan |
| 7 | Pressure match | LIMING | Italy/Japan |
| 8 | Auto lubrication system | ISHAN | China&Japan |
| 9 | High pressure oil pump | KIMBERLEY | Germany |
| 10 | Contactor | SHINAIDE | France |
| 11 | Solid State Relay | FORTEK | Taiwan |
| 12 | Air break switch | SIHNAIDE | France |
| 13 | Computer control | JINGHUA | Taiwan |
| 14 | High temperature wire | ------------- | Japan |
| 15 | Limited switch | NATIONAL | Japan |
| 16 | Proximity switch | FORTEK | Taiwan |
